Tips for selecting and using media
For the best results, observe the following guidelines.
•
Always use media that conforms to the printer specifications. For more
information, see Media specifications.
•
Load only one type of media at a time into a tray or automatic document feeder
(ADF).
•
When loading the trays and ADF, make sure the media is loaded correctly. For
more information, see Load media or Load an original in the automatic document
feeder (ADF).
•
Do not overload the tray or ADF. For more information, see Load media or Load
an original in the automatic document feeder (ADF).
•
To prevent jams, poor print quality, and other printing problems, avoid loading the
following media in the trays or ADF:
◦
Multipart forms
◦
Media that is damaged, curled, or wrinkled
◦
Media with cutouts or perforations
◦
Media that is heavily textured, embossed, or does not accept ink well
(continued)
Select print media
21
◦
Media that is too lightweight or stretches easily
◦
Media that contains staples or clips
NOTE: To scan, copy, or fax documents that contain pages that do not
conform to these guidelines, use the scanner glass. For more information, see
Load an original on the scanner glass.